1. Adopts the negative pressure filling it ensures minimal loss of CO2 from the product.
2. The configuration of filler is advanced, pithy and rational and the driving and up-down transmission is located between the stainless steel working plat and the bracket and their waterproof is good, sanitary and credible and adjusting and maintaining are very easy.
3. We design the filling valves on basis of foreign advanced technique for adapting high-speed hot filling. It can ensure the valves open and close flexibly because of using guide sheath. Adopting easy-fixed configuration, the valve is easy to cleaning promptly and has automatic cleaning function.
4. The filling operation is faster and more stable because the new type micro pressure filling system is adopted.
5. The electropneumatic filling valves are equipped with interchangeable level tubes to make the best precision filling, and the filling level for the bottle is adjust.
6. No bottle,no filling, no capping and Automatic stop when lack of bottle.
32 Rinsing head part---Plastic bottle
Spring cramps are used in the bottle washing process. The empty bottles can be turned over 180° Along the conveying rail. There are two times of internal and external washing, the efficiency of bottle washing is high.Bottle clip equipped with efficient spray on nozzle. The extrusive droplet with 15° Angle ensures to wash all side of the bottle, and can save the water.
32 Filling head part---Plastic bottle
The design of filling structure is reasonable and hygiene dead angle, the run of equipment is stable, it can control the material from the bottleneck, the control accuracy is within ± 2mm (subject to bottle design). The filling valve material is SUS304. The filling system has liquid level automatic control. Filling valve lift is controlled by the valve elevator, after filling valve contact the bottleneck, it start to fill. Bottle is conveying by the wheel in the filling part.
10 Capping head part---Plastic bottle with Plastic screw cap
The capping machine can cap different kinds of bottles, it is reliable, easy to operate and easy to maintain. It are widely used in water, food, drinks, medicine, chemicals, reagents, pesticides and automatic packing etc. It is the most popular rotary screw automatic capper.Screw capping machine is most precision part in the 3-1 machine, it has a big influence to the goods stability and defective rate.
1.we can send you the video of the running machine you are welcome to come to visit our company,and see the machine running in our factory,we can pick you up from the station near our city.
2.If we get the permission of the customer who has brought the machines from us ,we can tell you their contact imformation,you can go to visit their factory.
1.we can design the machines according your requirements(materil ,power,filling type,the kinds of the bottles,and so on).
2.At the same time we will give you our professional suggestion,as you know,we have been in this industry for many years.
1.we will provide the bill of load on time to make sure you can get the machine quickly.
2.when you finish the Preparation conditions ,our engineer will go to your factory to install the machine ,and give you the operating manual ,and train your employee until they can operate the machine well.
3.we provide one year warranty with spare parts free.
It is a professional manufacturer of beverage packaging solutions. We supply
Water treatment system,
Water filling production line,
Carbonated drink making filling production line,
Juice making filling production line,
3&5 gallon filling production line,
Labeling machine and shrink packing machine.
With our machines, bottles can be plastic bottle, glass bottle barrel and cans.
In other words, customized machines can be produced according to client's requirements.
We have been in beverage packing more than 10 years.
Welcome to visit our factory to see the machine running in the factory.
1) Can your factory provide the whole plant from A to Z?
A: Yes, we can provide the complete plant, from bottling making plant, water purification plant, to filling packing plant.
2) Are all machinery your factory made?
Our factory make the water purification and filling packing plants.We also do make the bottle making machinery,we have good quality bottle making machinery partner,and we provide to customer same long warranty time and good after service.
3) How can I know the machinery quality before I order?
Frist, we will invite you visiting our factory to check the machines quality, and show the machines running for you in our factory.
4) What certificates you can provide?
A: Our factory provide the CE, ISO9001, and accroding to some countries, we also can provide the Pvoc, Coc, Soncap...ect .
5) Can your factory make the bottle drawing, workshop layout, and labels for us?
A: We can help customers design their own bottle shape, workshop layout and label drawings, these jobs are free charge. (Workshop need customer to provide the size of factory).
6) Installation and Training Time.
A: We have professional engineer for oversea installaion and training,they can speak English, and have much experience oversea work.